If you are looking for a way to remove a bike chain without a master link, you should look no further than here.
With tools or without tools, in this article, we’ll tell you that how you can remove a bike chain without a master link. Let’s hop into the article for complete details.
The Master Link
A master link is also known as a quick release of any chain. But the question is, all single pieces of a chain look similar? Do they? No, they are not similar. If you look closely, you will notice a piece or joint of a different color. This different piece, which is usually shiny, is known as a master link.
4 Parts Of The Chain
But if you are unable to find the master link or it’s missing, don’t worry, we have got you covered. But you must learn about the four parts of the chain before breaking it. The first one is Pin or Rivet, the second is Inner Plate, the third one is the Outer Plate, and the last one is known as the Roller.
Breaking a Chain with a Master Link
Keeping it simple, all you have to do is pull out a pin from your chain or pull out the two rollers of your master link and the chain will break. Similarly, you can connect all the pieces just by putting the pin back in its place. But, breaking a chain without a master link isn’t that easy.
Breaking a Chain without a Master Link
For removing a chain without a master link, first, you have to make sure that your chain is motionless. It will keep this whole process easy. For making it motionless, remove your chain from the derailleur. Now, there are three ways to break a chain without a master link. We’ll discuss each process separately. So, stay with us till the very end.
With a Hammer & the Nail
In this process, the first important thing is the position of your chain. You have to figure out a position for your chain in which you can hammer it easily. Then you have to place your chain on something hard so that the pin of the chain can get out easily.
After placing the chain on such a surface, place a nail on the center of the pin. Now you have to hammer the pin until it completely comes out. By doing this, you’ll be able to remove the link from your chain.
If you are looking to connect the chain again, hammering does it all. You have to hammer your pin back into it. But, keep in mind that if your rivet or pin was damaged by the hammer, you might have to get a new one for yourself.
With a Steel Cutter or a Saw
A saw can cut usually everything which comes under it and you can expect the same for your chain. But we’ll not recommend it as it is not a popular method for breaking a chain because sometimes there is no going back. You have to get a new chain for yourself if the old one gets damaged.
With a Chain Breaker
Now it’s time to discuss the more easy and safe method. We have kept this treat for you in the end. With the help of a chain breaker, you can also call it a chain tool, you can remove a chain without a master link very easily.
You have to make sure that you have put the chain in the right position. If everything is in order, the pushed pin will get out smoothly once the lever of the chain breaker is pulled. With a chain breaker, you also have an edge of getting the pinout to a certain degree where you can disconnect or break the chain easily.
If you do everything right, then you can use your old pin to connect the chain again. Because the chain breaker will not damage your pins like a hammer or steel cutter. You can get this charmer easily in any bike or repairing shop.
Frequently Asked Questions(FAQ’s)
Do all bike chains have a master link?
Negative, all bikes do not have master links. Bikes having derailleurs have usually no master link in their chains.
How do you break a chain without a tool?
You can break your chain without a tool. By using a hammer or a nail or by using a saw or a steel cutter you can break your chain.
Can you put two master links in a chain?
A single piece is strong enough to get your job done. There’s no need of having two master links in a single chain.
How do I get rid of missing links without a tool?
Fold the chain in the shape of Z and then push the top and bottom of the Z. After that, pull the chain and that’s it.
How do you put a chain link back on a bicycle?
The easiest method is to use a chain tool. Just don’t pull out the pin completely from the link and use the chain tool to snap it back at its original place.
Conclusion
From top to bottom, we have discussed three different methods of breaking a chain without a master link. Follow the instructions carefully and you will be able to break a chain without a master link.
Leave a Reply